Bidirectional and Stepwise Rotation of Cells and Particles Using Induced Charge Electroosmosis Vortexes.

The rotation of cells is of significant importance in various applications including bioimaging, biophysical analysis and microsurgery. Current methods usually require complicated fabrication processes. Herein, we proposed an induced charged electroosmosis (ICEO) based on a chip manipulation method for rotating cells. Under an AC electric field, symmetric ICEO flow microvortexes formed above the electrode surface can be used to trap and rotate cells. We have discussed the impact of ICEO and dielectrophoresis (DEP) under the experimental conditions. The capabilities of our method have been tested by investigating the precise rotation of yeast cells and K562 cells in a controllable manner. By adjusting the position of cells, the rotation direction can be changed based on the asymmetric ICEO microvortexes via applying a gate voltage to the gate electrode. Additionally, by applying a pulsed signal instead of a continuous signal, we can also precisely and flexibly rotate cells in a stepwise way. Our ICEO-based rotational manipulation method is an easy to use, biocompatible and low-cost technique, allowing rotation regardless of optical, magnetic or acoustic properties of the sample.

[2 + 2] cycloaddition and its photomechanical effects on 1D coordination polymers with reversible amide bonds and coordination site regulation.

Photo-responsive materials can convert light energy into mechanical energy, with great application potential in biomedicine, flexible electronic devices, and bionic systems. We combined reversible amide bonds, coordination site regulation, and coordination polymer (CP) self-assembly to synthesize two 1D photo-responsive CPs. Obvious photomechanical behavior was observed under UV irradiation. By combining the CPs with PVA, the mechanical stresses were amplified and macroscopic driving behavior was realized. In addition, two cyclobutane amide derivatives and a pair of cyclobutane carboxyl isomers were isolated through coordination bond destruction and amide bond hydrolysis. Therefore, photo-actuators and supramolecular synthesis in smart materials may serve as important clues.

Bipolar Electrode-based Sheath-Less Focusing and Continuous Acoustic Sorting of Particles and Cells in an Integrated Microfluidic Device.

Sheath-less focusing and sorting of cells or particles is an important preprocessing step in a variety of biochemical applications. Most of the previous sorting methods depend on the use of sheath flows to realize efficient cell focusing. The sheath flow dilutes the sample and requires precise flow control via additional channels. We, for the first time, reported a method of bipolar electrode (BPE)-based sheath-less focusing, switching, and tilted-angle standing surface acoustic wave-based sorting of cells and particles in continuous flow. The device consists of a piezoelectric substrate with a pair of BPEs for focusing and switching, and a pair of interdigitated transducers for cell sorting. Smaller cells experience a weak acoustic force and reach the lower outlet, whereas larger cells are subjected to a strong acoustic force such that they are propelled toward the upper outlet. We first validate the device functionality by sorting 5 and 8 µm PS beads with a high sorting efficiency. The working and deflection regions were increased by propelling the particle beam toward the bottom edge of BPE via changing the applied voltage of BPE, further improving the sorting performance with high efficiency (94%) and purity (92%). We then conducted a verification for sorting THP-1 and yeast cells, and the efficiency and purity reached 90.7 and 91.5%, respectively. This integrated device eliminates the requirement of balancing the flow of several sheath inlets and provides a robust and unique approach for cell sorting applications, showing immense promise in various applications, such as medical diagnosis, drug delivery, and personalized medicine.

Three-dimensional rotation of deformable cells at a bipolar electrode array using a rotating electric field.

Three-dimensional rotation of cells is imperative in a variety of applications such as biology, medicine, and chemistry. We report for the first time a versatile approach for executing controllable 3D rotation of cells or particles at a bipolar electrode (BPE) array using a rotating electric field. The versatility of this method is demonstrated by 3D rotating various cells including yeast cells and K562 cells and the cells can be rotated to a desired orientation and immobilized for further operations. Our results demonstrate how electrorotation torque, induced charge electroosmosis (ICEO) flow and dielectrophoresis can be exerted on certain cells for modulating the rotation axis, speed, and direction. ICEO-based out-of-plane rotation is capable of rotating various cells in a vertical plane regardless of their shape and size. It can realize cell orientation by rotating cells toward a specific angle and enable cell rotation by steadily rotating multiple cells at a controllable speed. The rotation spectrum for in-plane rotation is further used to extract the cellular dielectric properties. This work offers a flexible method for controllable, contactless and precise rotation of different cells or particles, offering a rapid, high-throughput, and nondestructive rotation method for cell analysis and drug discovery.

An 18.3 MJ charging and discharging pulsed power supply system for the space plasma environment research facility (SPERF): the subsystem for the magnetic mirror coil.

The magnetic reconnection process relevant to that at the magnetotail is one of the research contents of the Space Plasma Environment Research Facility, which is under construction at the Harbin Institute of Technology in China. Two magnetic mirror sub-coils placed symmetrically in the vertical direction and connected in series cooperate with a dipole coil to generate a magnetic field environment similar to the Earth's magnetotail. A capacitor-based pulsed power supply (PPS) system with a modular design is developed to excite two magnetic mirror sub-coils to generate a magnetic field with a magnetic flux density of not less than 200 G at the center of the two sub-coils. The PPS should deliver a pulsed current with a peak of more than 8 kA, and the duration of the current not be less than 95% of the peak over 5 ms to two magnetic mirror sub-coils when the charging voltage is not less than 20 kV. In addition, the duration from the peak to 10% of the peak is not more than 130 ms. The detailed design of the PPS is discussed in this paper, and a test method is designed to reduce the risk of damage to the wires and the connection between the wires and the coaxial cables of the PPS when the PPS discharges at a higher charging voltage. Finally, the discharge test of the PPS is carried out to verify the design of the PPS.

Small extracellular vesicles derived from umbilical cord mesenchymal stem cells repair blood-spinal cord barrier disruption after spinal cord injury through down-regulation of Endothelin-1 in rats.

Spinal cord injury could cause irreversible neurological dysfunction by destroying the blood-spinal cord barrier (BSCB) and allowing blood cells like neutrophils and macrophages to infiltrate the spinal cord. Small extracellular vesicles (sEVs) derived from mesenchymal stem cells (MSCs) found in the human umbilical cord have emerged as a potential therapeutic alternative to cell-based treatments. This study aimed to investigate the mechanism underlying the alterations in the BSCB permeability by human umbilical cord MSC-derived sEVs (hUC-MSCs-sEVs) after SCI. First, we used hUC-MSCs-sEVs to treat SCI rat models, demonstrating their ability to inhibit BSCB permeability damage, improve neurological repair, and reduce SCI-induced upregulation of prepro-endothelin-1 (prepro-ET-1) mRNA and endothelin-1 (ET-1) peptide expression. Subsequently, we confirmed that hUC-MSCs-sEVs could alleviate cell junction destruction and downregulate MMP-2 and MMP-9 expression after SCI, contributing to BSCB repair through ET-1 inhibition. Finally, we established an in vitro model of BSCB using human brain microvascular endothelial cells and verified that hUC-MSCs-sEVs could increase the expression of junction proteins in endothelial cells after oxygen-glucose deprivation by ET-1 downregulation. This study indicates that hUC-MSCs-sEVs could help maintain BSCB's structural integrity and promote functional recovery by suppressing ET-1 expression.

Label free and high-throughput discrimination of cells at a bipolar electrode array using the AC electrodynamics.

BACKGROUND: Cell characterization and manipulation play an important role in biological and medical applications. Cell viability evaluation is of significant importance for cell toxicology assay, dose test of anticancer drugs, and other biochemical stimulations. The electrical properties of cells change when cells transform from healthy to a pathological state. Current methods for evaluating cell viability usually requires a complicated chip and the throughput is limited. RESULTS: In this paper, a bipolar electrode (BPE) array based microfluidic device for assessing cell viability is exploited using AC electrodynamics. The viability of various cells including yeast cells and K562 cells, can be evaluated by analyzing the electro-rotation (ROT) speed and direction of cells, as well as the dielectrophoresis (DEP) responses of cells. Firstly, the cell viability can be identified by the position of the cell captured on the BPE electrode in terms of DEP force. Besides, cell viability can also be evaluated based on both the cell rotation speed and direction using ROT. Under the action of travelling wave dielectric electrophoresis force, the cell viability can also be distinguished by the rotational motion of cells on bipolar electrode edges. SIGNIFICANCE: This study demonstrates the utility of BPEs to enable scalable and high-throughput AC electrodynamics platforms by imparting a flexibility in chip design that is unparalleled by using traditional electrodes. By using BPEs, our proposed new technique owns wide application for cell characterization and viability assessment in situ detection and analysis.

Advances in Research on the Regulatory Roles of lncRNAs in Osteoarthritic Cartilage.

Osteoarthritis (OA) is the most common degenerative bone and joint disease that can lead to disability and severely affect the quality of life of patients. However, its etiology and pathogenesis remain unclear. It is currently believed that articular cartilage lesions are an important marker of the onset and development of osteoarthritis. Long noncoding RNAs (lncRNAs) are a class of multifunctional regulatory RNAs that are involved in various physiological functions. There are many differentially expressed lncRNAs between osteoarthritic and normal cartilage tissues that play multiple roles in the pathogenesis of OA. Here, we reviewed lncRNAs that have been reported to play regulatory roles in the pathological changes associated with osteoarthritic cartilage and their potential as biomarkers and a therapeutic target in OA to further elucidate the pathogenesis of OA and provide insights for the diagnosis and treatment of OA.

Comparison of the clinical efficacy of unilateral and bilateral pedicle screw short-segment fixation and fusion in the treatment of atlantoaxial fracture-dislocation.

BACKGROUND: Few studies have compared the clinical efficacy of unilateral and bilateral pedicle screw fixation and fusion in treating atlantoaxial fracture-dislocation. OBJECTIVE: To compare the efficacy of unilateral and bilateral fixation and fusion for atlantoaxial fracture-dislocation and to explore the feasibility of the unilateral surgical procedure. METHODS: Twenty-eight consecutive patients with atlantoaxial fracture-dislocation were included in the study from June 2013 to May 2018. They were divided into a unilateral fixation group and a bilateral fixation group (14 patients in each group with an average age of 43.6 ± 16.3 years and 51.8 ± 15.4 years, respectively). The unilateral group had a unilateral anatomical variation of the pedicle or vertebral artery, or traumatic pedicle destruction. All patients underwent atlantoaxial unilateral or bilateral pedicle screw fixation and fusion. Intraoperative blood loss and operation time were recorded. The visual analog scale (VAS) and Japanese Orthopedic Association (JOA) scoring systems were used to evaluate pre- and postoperative occipital-neck pain and neurological function. X-ray and computerized tomography (CT) were used to assess atlantoaxial stability, the implants' position, and bone graft fusion. RESULTS: All patients were followed up for 39-71 months postoperatively. Intraoperatively, no spinal cord or vertebral artery injury was observed. At the last follow-up, occipital-neck pain and neurological function in the two groups were significantly improved (P< 0.05). The X-ray films and CT showed satisfactory atlantoaxial stability, implant position, and osseous fusion in all the patients at 6 months postoperatively. CONCLUSION: Unilateral and bilateral pedicle screw fixation and fusion can restore atlantoaxial stability and improve occipital-neck pain and neurological function in patients with atlantoaxial fracture-dislocation. The unilateral surgical procedure can be a supplementary option for patients with unilateral abnormal atlantoaxial lesions.

Development and evaluation of nomograms for predicting osteoarthritis progression based on MRI cartilage parameters: data from the FNIH OA biomarkers Consortium.

BACKGROUND: Osteoarthritis (OA) is a leading cause of disability worldwide. However, the existing methods for evaluating OA patients do not provide enough comprehensive information to make reliable predictions of OA progression. This retrospective study aimed to develop prediction nomograms based on MRI cartilage that can predict disease progression of OA. METHODS: A total of 600 subjects with mild-to-moderate osteoarthritis from the Foundation for National Institute of Health (FNIH) project of osteoarthritis initiative (OAI). The MRI cartilage parameters of the knee at baseline were measured, and the changes in cartilage parameters at 12- and 24-month follow-up were calculated. The least absolute shrinkage and selection operator (LASSO) regression analysis was used to extract the valuable characteristic parameters at different time points including cartilage thickness, cartilage volume, subchondral bone exposure area and uniform cartilage thickness in different sub regions of the knee, and the MRI cartilage parameters score0, scoreΔ12, and scoreΔ24 at baseline, 12 months, and 24 months were constructed. ScoreΔ12, and scoreΔ24 represent changes between 12 M vs. baseline, and 24 M vs. baseline, respectively. Logistic regression analysis was used to construct the nomogram0, nomogramΔ12, and nomogramΔ24, including MRI-based score and risk factors. The area under curve (AUC) was used to evaluate the differentiation of nomograms in disease progression and subgroup analysis. The calibration curve and Hosmer-Lemeshow (H-L) test were used to verify the calibration of the nomograms. Clinical usefulness of each prediction nomogram was verified by decision curve analysis (DCA). The nomograms with predictive efficacy were analyzed by secondary analysis. Internal verification was assessed using bootstrapping validation. RESULTS: Each nomogram included cartilage score, KL grade, WOMAC pain score, WOMAC disability score, and minimum joint space width. The AUC of nomogram0, nomogramΔ12, and nomogramΔ24 in predicing the progression of radiology and pain were 0.69, 0.64, and 0.71, respectively. All three nomograms had good calibration. Analysis by DCA showed that the clinical effectiveness of nomogramΔ24 was higher than others. Secondary analysis showed that nomogram0 and nomogramΔ24 were more capable of predicting OA radiologic progression than pain progression. CONCLUSION: Nomograms based on MRI cartilage change were useful for predicting the progression of mild to moderate OA.

Effect of biochar application rate on changes in soil labile organic carbon fractions and the association between bacterial community assembly and carbon metabolism with time.

Biochar aging affects the stability of soil carbon. Analyzing the effect of biochar on soil organic carbon (SOC) forms and their relations with microbial community assembly and carbon metabolism with time is helpful for soil carbon sequestration (by adapting the farm management approach). Four treatments with no, low, medium, and high biochar application rates (0 %, 1 %, 2 %, and 4 % of the total dry weight of topsoil before winter wheat planting, abbreviated as control, LB, MB, and HB, respectively) were conducted in the field. The SOC and particulate organic carbon positively correlated with the biochar application rate. Biochar decreased readily oxidizable carbon (P < 0.05) after 8 months of application compared to the control; however, the difference disappeared with time. Biochar increased dissolved organic carbon (DOC) but had no effect on water- soluble organic carbon (WSOC); DOC and WSOC decreased with time. Furthermore, LB and HB stabilized the bacterial alpha diversities with time. Based on high-throughput sequencing, HB reduced the relative abundance of Actinobacteriota but increased that of Acidobacteria (P < 0.05) after 12 months of biochar application. Time-wise, the bacterial community assembly was determined by deterministic processes that were significantly affected by the available nitrogen, DOC, or WSOC. Compared with the control, biochar decreased bacterial links and improved bacterial metabolism of phenolic acids and polymers with time, as evidenced by Biolog EcoPlates. Structural equation modeling revealed that the contribution of bacterial assembly processes to carbon metabolism changed with time. Microbial carbon metabolism was most positively influenced by differences in the composition of bacterial specialists. These findings reinforced that changes in soil labile organic carbon were time-dependent but not necessarilty affected by the biochar application rate.

The association between statin use and osteoarthritis-related outcomes: An updated systematic review and meta-analysis.

Objective: Findings among studies evaluating the effect of statin use and OA development in a 2020 meta-analysis of data from 11 observational studies of statin use and osteoarthritis (OA) revealed controversial results. We aimed to determine the associations between statin use and OA-related outcomes in an updated meta-analysis. Methods: The protocol was registered with PROSPERO (CRD42020163983). A systematic literature retrieval was performed in the online databases, including PubMed, Cochrane Library, Embase, Web of Science, and Scopus, from inception to 1 June 2022, for clinical studies that compared the effects of statin users vs. nonusers on OA-related outcomes risks. Systematic reviews and meta-analyses were performed to estimate the correlations between statin use and OA-related outcomes. Tendency analysis was also used to estimate dose-response effects. The risk of bias was evaluated with the Newcastle-Ottawa scale. Results: We included 23 studies involving more than 6,000,000 participants. Statin use was associated with increased OA risk (OR 1.099 [95%CI 1.002-1.206, p = 0.045]). Higher statin doses had higher OA risk (simvastatin equivalent daily of >40 mg). OA and related surgery risks were significantly reduced in statin users using antihypertensive drugs (AHDs). No significant differences were seen in other outcomes. Conclusion: This meta-analysis inferred that statin use might be associated with increased OA development, especially at higher doses. The present study highlights the importance of recognizing potential OA risk in the population with long-term and/or high-dose statin use, especially in older populations. In addition, AHDs are associated with lower OA risk and fewer surgeries in hypertensive statin users. Due to limitations of heterogeneity and confounders, more rigorous studies are needed to define the correlations between statin use and OA-related outcomes.

Comparing oblique lumbar interbody fusion with lateral screw fixation and percutaneous endoscopic transforaminal discectomy (OLIF-PETD) and minimally invasive transforaminal lumbar interbody fusion (MIS-TLIF) for the treatment of lumbar disc herniation complicated with lumbar instability.

OBJECTIVE: To evaluate the early clinical effect of oblique lumbar interbody fusion with lateral screw fixation and percutaneous endoscopic transforaminal discectomy (OLIF-PETD) in the treatment of lumbar disc herniation with lumbar instability. METHODS: A total of 22 patients with lumbar disc herniation and lumbar instability from August 2017 to August 2019 were enrolled in this retrospective study. The general information, perioperative indicators and complications were recorded. The clinical outcomes and radiological outcomes were evaluated before the operation, seven days after the operation, and at the last follow-up. Vertebral fusion and degree of multifidus muscle injury were evaluated at the last follow-up. RESULTS: In this study, OLIF + PETD showed shorter incision length compared to the MIS-TLIF (P < 0.001). In the two groups, the clinical outcomes and radiological outcomes were significantly improved compared with the preoperative (P < 0.001). At the seven days after the operation and the last follow-up, the VAS of OLIF + PETD group was lower than that of MIS-TLIF group (P < 0.05). OLIF + PETD could give superior outcome in restoring disc height (P < 0.001), but the fusion segment angle of OLIF + PETD group was larger compared to the MIS-TLIF group seven days after the operation and at the last follow-up (P < 0.05). In addition, the fusion rate was not significantly different between the two groups (P > 0.05), but OLIF + PETD could avoid the multifidus injury (P < 0.001). CONCLUSION: Compared to MIS-TLIF, OLIF-PETD can achieve satisfactory decompression effects and fusion rates with less multifidus injury and postoperative low back pain, which may be an alternative choice for the treatment of lumbar disc herniation combined with lumbar instability.

Effects of ß2 Integrins on Osteoclasts, Macrophages, Chondrocytes, and Synovial Fibroblasts in Osteoarthritis.

ß2 integrins are transmembrane receptors that exist widely in human immune cells and participate in pathological processes such as chronic inflammation, thrombosis, and malignant tumor formation. They mainly mediate intercellular adhesion, coordinate the ingestion of extracellular matrix components, and regulate cytoskeleton formation, thereby regulating cell signaling. Osteoarthritis (OA) is a chronic joint disease that causes joint pain and increases disease burden; it has a high prevalence among populations worldwide. Previous studies have reported that ß2 integrins are overexpressed in OA and may play an essential role in the occurrence of OA. The important roles of ß2 integrins in the maturation and differentiation of osteoclasts, the regulation of bone homeostasis, and the polarization and migration of macrophages have also been reported. The present review aims to highlight the role of ß2 integrins in OA pathogenesis and outline their potential for serving as therapeutic targets.

C-reactive protein to lymphocyte ratio as a new biomarker in predicting surgical site infection after posterior lumbar interbody fusion and instrumentation.

Purpose: This study aims to evaluate the potential of C-reactive protein to lymphocyte count ratio (CLR) for the prediction of surgical site infection (SSI) following posterior lumbar interbody fusion (PLIF) and the instrumentation of lumbar degenerative diseases. Methods: In this retrospective study, we considered patients with a lumbar degenerative disease diagnosis surgically treated by the instrumented PLIF procedure from 2015 to 2021. Patient data, including postoperative early SSI and other perioperative variables, were collected from their respective hospitalization electronic medical records. The receiver operator characteristic curve was constructed to determine the optimal cut-off value for CLR, and the ability to predict SSI was evaluated by the area under the curve (AUC). According to the cut-off value, patients were dichotomized with high- or low-CLR, and between-group differences were compared using univariate analysis. The independent impact of CLR on predicting SSI was investigated by multivariate logistics regression analysis. Results: A total of 773 patients were included, with 26 (3.4%) developing an early SSI post-operation. The preoperative CLR was 11.1 ± 26.1 (interquartile range, 0.4-7.5), and the optimal cut-off was 2.1, corresponding to a sensitivity of 0.856, a specificity of 0.643, and an AUC of 0.768 (95% CI, 0.737-0.797). CLR demonstrated a significantly improved prediction ability than did lymphocyte count (P = 0.021) and a similar ability to predict an infection as C-response protein (P = 0.444). Patients with a high CLR had a significantly higher SSI incidence than those with a low CLR (7.6% vs. 0.8%, P < 0.001). After adjustment for numerous confounding factors, CLR ≥ 2.1 was associated with an 11.16-fold increased risk of SSI, along with other significant variables, i.e., diabetes, preoperative waiting time, and surgical duration. Conclusion: A high CLR exhibited an improved ability to predict incident SSI and was associated with a substantially increased risk of SSI following instrumented PLIF. After better-design studies verified this finding, CLR could potentially be a beneficial tool in surgical management.

Dynamic gelatin-based hydrogels promote the proliferation and self-renewal of embryonic stem cells in long-term 3D culture.

Long-term maintenance of embryonic stem cells (ESCs) in the undifferentiated state is still challenging. Compared with traditional 2D culture methods, 3D culture in biomaterials such as hydrogels is expected to better support the long-term self-renewal of ESCs by emulating the biophysical and biochemical properties of the extracellular matrix (ECM). Although prior studies showed that soft and degradable hydrogels favor the 3D growth of ESCs, few studies have examined the impact of the structural dynamics of the hydrogel matrix on ESC behaviors. Herein, we report a gelatin-based structurally dynamic hydrogel (GelCD hydrogel) that emulates the intrinsic structural dynamics of the ECM. Compared with covalently crosslinked gelatin hydrogels (GelMA hydrogels) with similar stiffness and biodegradability, GelCD hydrogels significantly promote the clonal expansion and viability of encapsulated mouse ESCs (mESCs) independent of MMP-mediated hydrogel degradation. Furthermore, GelCD hydrogels better maintain the pluripotency of encapsulated mESCs than do traditional 2D culture methods that use MEF feeder cells or medium supplementation with GSK3ß and MEK 1/2 inhibitors (2i). When cultured in GelCD hydrogels for an extended period (over 2 months) with cell passaging every 7 days, mESCs preserve their normal morphology and maintain their pluripotency and full differentiation capability. Our findings highlight the critical role of the structural dynamics of the hydrogel matrix in accommodating the volume expansion that occurs during clonal ESC growth, and we believe that our dynamic hydrogels represent a valuable tool to support the long-term 3D culture of ESCs.

An 18.3 MJ charging and discharging pulsed power supply system for the Space Plasma Environment Research Facility (SPERF): The integrated control subsystem.

The Space Plasma Environment Research Facility uses a coil system with the corresponding pulsed power supply (PPS) system to generate a very flexible magnetosphere-like magnetic configuration. Its purpose is to investigate the 3D asymmetric reconnection and the processes of trapping, acceleration, and transport of energetic charged particles restrained in a dipole magnetic field configuration, as well as the physical mechanism of the dipolarization front in the magnetotail. The control and monitoring function of the PPS system is realized by the integrated control subsystem, which adopts a two-layer network structure of the control layer and device layer and is developed based on the Experimental Physics and Industrial Control System framework. The control layer includes a remote control system that consists of an engineer station and an operator station and the data storage system. Both the engineer station and operator station are developed by Control System Studio. The data storage system is based on the combination of the Hierarchical Data Format 5 database and MySQL database, and the data management software of the data storage system is developed based on LabVIEW. The synchronous trigger device, the safety interlocking device, the local controller of each set of PPS, and the module controller of each discharge module are the device layer. Their hardware is designed and developed based on the Field Programmable Gate Array, and their software is based on the Quartus II platform and programmed with the Verilog Hardware Description Language language. The function of the integrated control subsystem is verified by the discharge test of the PPS system.

Duck sewage source coliphage P762 can lyse STEC and APEC.

Multiple pathogenic types or serotypes restrict treatment for colibacillosis. In addition, rising antibiotic resistance has heightened public awareness to prevent and control pathogenic Escherichia coli. The bacteriophage is a viable technique to treat colibacillosis as an alternative to antibiotics. P762, a coliphage isolated from duck farm sewage, was demonstrated to cloud lyse Shiga toxin-producing Escherichia Coli serotypes O157 and non-O157 (17/39), Avian pathogenic E. coli covered serotype O78, O83, and O9 (5/19), and other pathogenic Escherichia coli (5/17). Additional fundamental biological characteristics analysis revealed that P762 is stable at pH 3 ~ 11 and temperature between 4 °C and 60 °C, and its optimum multiplicity of infection (MOI) is 0.1. The one-step curve of P762 exhibited three bursts of growth stage: two rapid and one slow stage. Furthermore, the first rapid burst size is 80 CFU/PFU, the burst size of the slow stage is 10 CFU/PFU, and the second rapid burst size is about 990 CFU/PFU. In addition, P762 can form a "halo" on a double agar plate, implying that the phage secretes depolymerase. With 95.14% identity and 90% query coverage, genome sequence analysis revealed that P762 is most closely related to Escherichia phage DY1, which belongs to the genus Kayfunavirus. After screening using RAST and VFDB, no virulence factors were discovered in P762. In vitro antibacterial tests revealed that P762 has high bactericidal activity in lettuce leaves contaminated with STEC. In conclusion, phage P762 might be employed in the future to prevent and control pathogenic Escherichia coli.

All-solid-state pulsed current injection source based on the light initiated multi-gate semiconductor switches.

To study the damage and protection mechanism of the transient electromagnetic pulse to the cables of the electronic equipment under test, an all-solid-state pulsed current injection source with light initiated multi-gate semiconductor switches is developed. The output peak current range of the prepared all-solid-state pulsed current injection source was 0.1-1 kA, the risetime was 18 ns, and the pulse width was 520 ns. In addition, the waveforms of the output peak current were consistent.

Enhancement of Binding Kinetics on Affinity Substrates Using Asymmetric Electroosmotic Flow on a Sinusoidal Bipolar Electrode.

In the context of the COVID-19 epidemic, enhancing the transport of analyte to a sensor surface is crucial for rapid detection of biomolecules since common conditions, including low diffusion coefficients, cause inordinately long detection times. Integrated microfluidic immunoassay chips are receiving increasing attention for their low sample volume and fast response time. We herein take advantage of asymmetric ICEO flow at a bipolar sinusoidal electrode to improve the rate of antibody binding to the reaction surface based on finite element modeling. Three different microfluidic cavities are proposed by changing the positions of the surface reaction area. We further investigate the relationship between binding enhancement and reaction surface positions, Damkohler number, and the voltage and frequency of the AC signal applied to the driving electrodes. Furthermore, the influence of the AC signal applied to the sinusoidal bipolar electrode on antigen-antibody-binding performance is studied in detail. Above all, the simulation results demonstrate that the microfluidic immune-sensor with a sinusoidal bipolar electrode could not only significantly improve the heterogeneous immunoassays but also enable efficient enhancement of assays in a selected reaction region within the micro-cavity, providing a promising approach to a variety of immunoassay applications, such as medical diagnostics and environmental and food monitoring.